21 |
Power take-off drive unit |
US57029244 |
1944-12-29 |
US2448822A |
1948-09-07 |
PINARDI CHARLES P; BROCK HAROLD L |
|
22 |
Combined auxiliary transmission and power take-off |
US58918945 |
1945-04-19 |
US2438539A |
1948-03-30 |
COOK CHARLES A |
|
23 |
자동 묘목 이식기 |
KR1020080094257 |
2008-09-25 |
KR1020100034992A |
2010-04-02 |
신범수 |
PURPOSE: An automatic seedling transplanter is provided, which can automatically transplant seedlings in the surface. CONSTITUTION: An automatic seedling transplanter comprises: a plate(20) which is combined with the upper end of the frame formed in a trailer and in which a seedling falling unit is formed; a stepping motor axis-connected to the X and Y axis rails installed at the upper side of the plate; a seedling receiving part(30) dropping seedlings to the seedling falling unit; a first seedling inlet pipe(40); an opening and closing part(60) controlling falling of the seedlings; a seedling cut out part(50) cutting the seedlings; and seedling transplantation part(70) transplanting seedling to the surface. |
24 |
수수작물 수확장치 |
KR1020090099513 |
2009-10-20 |
KR1020110042715A |
2011-04-27 |
연재득 |
PURPOSE: A corn and sorghum harvester is provided to easily harvest crops including corn and sorghum after cutting stems of the crops. CONSTITUTION: A corn and sorghum harvester comprises the following: an inlet unit(100) including an inlet hole on the lower side, and a guiding wall for preventing the scattering of crops on the side; a receiving unit(200) connected to the lower side of the inlet unit, including a fixture for hanging a connection hook of a receiving sack and a fixing tong for fixing an inner sack of the receiving sack; a transfer unit for transferring harvested crops; and a trailer(400) formed on the lower side of the transfer unit. |
25 |
트랙터용 퇴비 살포기 |
KR2020040037419 |
2004-12-30 |
KR200384697Y1 |
2005-05-17 |
이월영 |
본 고안은 트랙터용 트레일러에 퇴비살포장치를 구비하여 트랙터의 동력으로 퇴비를 살포할 수 있게 구성한 것인데 구체적으로는
트랙터용 트레일러 함체(1)의 견인부(101)에 동력접속부(2)를 설치하여 피동축(201)을 장치하고 피동축 후미에 두개의 푸울리(3)(3a)를 고정시켜서 함체(1) 양측으로 설치된 동력전달축(4)(5)의 선단부 푸울리(401)(501)와 벨트(6)(6a)로 연결하여 동력전달축을 회전시킬 수 있게 구성하고
함체바닥에 퇴비이송체인(7)을 설치하여 그 개방부측에 있는 회전축(701)의 외측단을 함체 외면에 부착한 감속기(8)의 출력축(8b)에 접속하고 감속기 입력축(8a)과 동력절단축(5)의 외측단을 접속축(10)으로 연결하며
함체의 개방부 외측에 퇴비살포실(102)을 형성하여 그 내부에 회전살포기(9)를 장치하고 그 회전축(901)에 베벨기어(902)를 부착하여 퇴비살포실 외면에 부착된 기어박스(903)에 설치된 회전축(905)의 베벨기어(904)와 치합시키고 베벨기어 회전축(905)과 동력전달축(4)의 외측단을 접속축(10)으로 연결하여서 이루어지는 트랙터용 퇴비 살포기이다. |