121 |
Horizontal sealed compressor |
JP24101987 |
1987-09-28 |
JP2530179B2 |
1996-09-04 |
KAIO MARIO FURANKO NETOO DA KOSUTA; DEIITOMAA EERITSUHI BERUNHARUTO RIRII; MARUKOSU GIOBANI DOROPA DE BORUTORI |
|
122 |
Water pump for outboard motor |
JP5446194 |
1994-02-28 |
JPH07243386A |
1995-09-19 |
SHIMIZU TAKASHI; FUNABASHI YOSHIYUKI; YAMAZAKI TAKESHI |
PURPOSE: To smoothly and efficiently cool an engine even in the case of low speed rotation in a cold area and high speed rotation in a warm area.
CONSTITUTION: A cylindrical pump housing 12 storing an impeller 4 free to rotate by slightly decentering it, a water discharge port 10 installed on the outer periphery of the pump housing 12 and to deliver water energized by the impeller 4 and a water suction port 12A provided on an under-panel 14 constituting a part of the pump housing 12 are furnished, and air vent hole is provided on a part of the under-panel 14 and at a boundary position to move from a negative pressure region to a positive pressure region in the pump housing 12. The impeller 4 is connected to an output shaft 6 of an engine for an outboard motor. A pressure releasing hole of a comparatively small diameter is provided at a position deeper in the positive pressure region from the air vent hole.
COPYRIGHT: (C)1995,JPO |
123 |
Annular diaphragm pump |
JP11234489 |
1989-05-02 |
JPH01315687A |
1989-12-20 |
RIHIYARUTO FUON DEA HAIDE; EERITSUHI BETSUKAA |
PURPOSE: To reduce resistance of a rotary piston passing through an anchored portion so as to ensure smooth rotation thereof by providing a weakened portion for enhancing elasticity in the anchored portion of an annular diaphragm with a rotary piston arranged inside.
CONSTITUTION: A pump 1 has a work chamber 3 in a casing 2. An annular diaphragm 4 is arranged in the work chamber 3, and a rotary piston 5 is arranged in the diaphragm 4. The diaphragm 4 has an anchored portion 12, and the anchored portion 12 is supported between an inlet 13 and an outlet 14. In this case, a plurality of notches 16, 17 opening sidewise with a substantially S-shaped transversal cross section is formed in the anchored portion 12 for enhancing radial elasticity. Thus, it is possible to reduce the resistance of the rotary piston 5 passing through the anchored portion 12 so as to ensure the smooth concentric rotation of the rotary piston 5.
COPYRIGHT: (C)1989,JPO |
124 |
Impeller for pump and manufacture thereof |
JP7018084 |
1984-04-10 |
JPS59206692A |
1984-11-22 |
PIITAA ENU CHIYORAKISU |
|
125 |
Pump |
JP20990982 |
1982-11-29 |
JPS5999084A |
1984-06-07 |
NISHIUCHI MASAYASU; KOSEKI WASUKE; KOBAYASHI KATSUO; KATAYAMA HITOSHI |
PURPOSE:To eliminate the possibility of biting-in hairs or the like into rotating parts and prevent the deterioration of the performance of the pump due to foreign materials by a constitution wherein the pump is constituted by a casing and a movable body contacting with one or multiple points of the internal surface of the casing through an elastic film. CONSTITUTION:The elastic film 6 is extended on the internal surface of the casing 2 provided with a suction port 4 and a delivery port 5 and is pushed against the internal surface of the casing 2 by arms 8 equipped with compressible rollers connected to a rotary driving shaft 7. When the rotary driving shaft 7 is rotated, the arms 8, equipped with the compressible rollers, are rotated under a condition that they are pushing the elastic film 6 against the internal surface of the casing 2. In this case, each centers of the casing 2 and the rotary driving shaft 7 are eccentric, therefore, a volume, formed by the casing 2 and the elastic film 6, is different depending upon the position of the casing 2. Then, the action of pump is effected by utilizing the change of the volume. According to this method the performance of the pump will never be deteriorated by the foreign materials. |
126 |
Assembly of pump impeller |
JP15298083 |
1983-08-22 |
JPS5954792A |
1984-03-29 |
ROBAATO YUUJIN KUNEPUSHIIRUDO |
|
127 |
Impeller for use in pump |
JP576182 |
1982-01-18 |
JPS58124081A |
1983-07-23 |
NAKASE TAKEHIKO |
PURPOSE:To provide a simple and economical structure of vanes, capable of enhancing the performance of a pump or the like, making a resilient vane from a resilient metal plate with its inner end fixed to a bushing and a coating of a rubber or plastics material applied over the surface of said metal plate. CONSTITUTION:A resilient metal plate 9 made of a material such as spring steel or stainless steel having a high strength is buried in each vane 3 made of a synthetic rubber or a plastics material having a proper resiliency, and the inner end of the metal plates 9 are fixed in respective grooves 10 formed in the surface of a bushing 1 around the circumference thereof. The metal plate 9 is extended substantially over the entire region of the vane 3 and formed with through-holes 12 so as to increase the bond strength between the metal plate 9 and a rubber or plastics coating 11. By employing such an arrangement, it is enabled to increase the resiliecy and the strength of the vanes without changing the configuration and increasing the thickness of the vanes. |
128 |
JPS5735650Y2 - |
JP12004974 |
1974-10-03 |
JPS5735650Y2 |
1982-08-06 |
|
|
129 |
Rotary pump |
JP17247880 |
1980-12-06 |
JPS5797090A |
1982-06-16 |
ITOU KAZUICHI |
PURPOSE: To provide pulsation-free pumping action for two pump chambers which are partitioned by a diaphragm in a pump casing by allowing a pair of eccentric wheels to be driven eccentrically with a phase difference of 180° by the shaft of the pump, in the pump casing.
CONSTITUTION: A pair of eccentric wheels 14 are fitted around the pump shaft 7 which is axially supported rotatably onto a pump casing 1 through a bearing 8, separated in the axial direction and with a phase difference of 180° in the circumferential direction. Thus, a pair of eccentric wheels 14 are eccentrically driven with a phase difference of 180° by the shaft 7 of the pump in the pump casing 1, and the phases of the suction chamber Pi and the discharge chamber Pe which are formed in two pump chambers partitioned by a diaphragm 24 in the pump casing 1 are diverged by 180°, and the fluid transported under pressure from each discharge chamber Pe is joined, and the pulsation due to the divergence of phase of each fluid by 180° can be dissolved.
COPYRIGHT: (C)1982,JPO&Japio |
130 |
Diaphragm pump |
JP16266579 |
1979-12-14 |
JPS5584891A |
1980-06-26 |
EERITSUHI BETSUKAA |
|
131 |
JPS503008B1 - |
JP2567269 |
1969-04-04 |
JPS503008B1 |
1975-01-30 |
|
|
132 |
PUMP MOTOR FOR HIGH TEMPERATURE FLUIDS |
US16368160 |
2019-03-28 |
US20190219054A1 |
2019-07-18 |
Mark S. Amalfitano; Jeffrey S. Sherman; Steven R. Palmer; John H. Hussey |
A motorized pump assembly includes a pump and a motor for driving the pump. The pump includes a pump housing that at least in part defines a pump chamber. The motor includes a stator, a rotor rotatable about an axis, a motor housing, and a bearing assembly. The rotor includes a motor shaft extending along the axis. The motor housing includes an endshield that at least in part defines a motor chamber in which the stator and the rotor are at least substantially received. The bearing assembly rotatably supports the motor shaft on the endshield. The pump housing and the endshield are fixed to one another and cooperatively at least in part define an overflow chamber adjacent the pump chamber. The endshield defines a drainage channel fluidly interconnected with the overflow chamber and configured to direct fluid from the overflow chamber away from the bearing assembly. |
133 |
Pumps |
US14377384 |
2013-01-31 |
US10087931B2 |
2018-10-02 |
Richard Paul Hayes-Pankhurst |
A pump is formed by a housing (10) having a fluid inlet (11) and a fluid outlet (12) and containing a rotor (15) forming with the housing (10) chambers (17a, 17b) that, on rotation of the rotor (15) by a drive, convey fluid from the inlet (11) to the outlet (12) to pump the fluid. A seal assembly (14) is arranged between the outlet (12) and the inlet (11). The seal assembly (14) includes a membrane (21) that contacts the rotor (15) and a flexible resilient spring member (22, 28, 35, 37, 40) that provides a force urging the membrane (21) against the rotor (15). The spring member (22, 28, 35, 37, 40) thus, on rotation of the rotor (15), moves radially relative to the axis of rotation of the rotor (15) and is arranged to provide a force on the rotor (15) via the membrane (21) that is constant and a minimum to maintain a seal between the rotor (15) and the seal (14) for a given outlet pressure of the pumped fluid. |
134 |
Method For Operating A Device For The Dosed Supply Of A Liquid |
US15553523 |
2016-02-09 |
US20180238323A1 |
2018-08-23 |
Rolf BRÜCK; Peter BAUER; Christian VORSMANN; Jan HODGSON |
A method for operating a device for dosed supply of a liquid, having a pump to deliver the liquid. The pump has an inlet and an outlet. An eccentric is arranged on the pump housing and a deformable diaphragm is arranged between a pump housing and the eccentric. The deformable diaphragm and the pump housing delimit a delivery path from the inlet to the outlet. The seal can be displaced along the delivery path by movement of the eccentric. A pressure sensor is connected to the outlet of the pump. A liquid is delivered by the pump. A time curve of the pressure at the outlet of the pump is monitored during delivery by the at least one pressure sensor. An angle position of the eccentric of the pump is detected using at least one characteristic feature of the time curve at the outlet. |
135 |
Pump for metering a liquid additive for a selective catalytic reduction device |
US14772698 |
2014-02-04 |
US10054116B2 |
2018-08-21 |
Rolf Brück; Jan Hodgson |
A pump for conveying a liquid, having a pump housing that has at least one inlet and at least one outlet, an eccentric element being rotatably arranged in said pump housing and surrounded by a deformable membrane, the deformable membrane and pump housing delimiting at least one conveyor path from the at least one inlet to the at least one outlet and forming at least one seal for the conveyor path, and the seal being able to be displaced along the conveyor path by a movement of the eccentric element. Between the eccentric element and the deformable membrane, a spring layer is arranged by the eccentric element and deformable membrane are tensioned relative to one another. |
136 |
Pumps |
US14772877 |
2014-03-05 |
US09995296B2 |
2018-06-12 |
Richard Paul Hayes-Pankhurst; Jonathan Edward Ford |
A pump is formed by a housing (10) having an inlet (11) and an outlet (12) for a fluid. The housing (10) contains a rotator (13) provided with at least one surface recess (17a, 17b, 17c, 17d) that forms with an interior surface of the rotor a chamber (18a, 18b, 18c, 18d) that, on rotation of the rotor (13), conveys fluid from the inlet (11) to the outlet (12). A flexible seal (23) is provided on or as part of the housing (10) and is located between the inlet (11) to the outlet (12) to engage the rotor (13) to prevent fluid passing from the outlet (12) to the inlet (11). A second inlet (16) is provided leading to the outlet (12) for the supply to the outlet (12) of a second fluid and the second inlet (16) also supplies the second fluid to the back of the seal (23) to urge the seal (23) against the rotor (13). |
137 |
Impeller installation tool |
US14930121 |
2015-11-02 |
US09957977B1 |
2018-05-01 |
Scott Alan Benford |
A tool for installing a flexible impeller within a water pump includes a sleeve having a diameter smaller than an initial diameter of an impeller in a relaxed state, a support extending about an end of the sleeve, and a translation assembly engaged with the support and configured for translating a pushing surface of the translation assembly. In operation, an impeller is contracted into a constrained state and placed in the sleeve, the sleeve is then positioned proximal or in engagement with an opening of the water pump, and the translation assembly is translated such that the pushing surface pushes the impeller into the engine assembly as the translation assembly is translated. |
138 |
Belt and support for a rotor mechanism in a rotary apparatus and rotary apparatus comprising same |
US14351772 |
2012-10-12 |
US09926927B2 |
2018-03-27 |
Marc-Alexandre Curodeau; Benoit Allen; Rémi Hudon; Jimmy Laflamme Laroche |
A pump comprises a housing having an inner contour wall defining a fluid chamber. A rotor mechanism is positioned within the fluid chamber and comprises a belt and a rotatable rotor assembly. The belt is mounted to the rotor assembly. A movement imparting assembly imparts a rotational movement to the rotor assembly. The belt engages the inner contour wall during rotation. The housing includes intake and outtake ports in communication with the fluid chamber providing for intake of fluid therein and exhaust of fluid therefrom. |
139 |
Method for providing a liquid additive |
US14767513 |
2014-01-27 |
US09909477B2 |
2018-03-06 |
Rolf Brück; Jan Hodgson |
A method for operating a device for providing a liquid additive having at least one suction point for removing liquid additive from a tank, a valve-free conveying line extending from the suction point to a supply unit, and a valve-free displacement pump, the displacement pump being configured to convey the liquid additive from the tank via the suction point along the conveying line to the supply unit, the displacement unit having at least one seal of the conveying line, displaceable along the conveying line for conveying the liquid additive, includes: a) detecting a stoppage of operation of the device; b) establishing a position of the seal within the positive-displacement pump; and c) changing the position of the seal if the position of the seal does not correspond to a provided park position of the seal. |
140 |
PUMP DEVICE |
US15557113 |
2016-03-31 |
US20180045048A1 |
2018-02-15 |
Markus BRAXMAIER; Hassan GHODSI-KHAMENEH; Daniel HAUER; Juergen HERR; Marc JEUCK; Gerhard KUHNERT; Wolfgang LAUFER; Mario STAIGER |
The invention relates to a pump device for pumping a liquid having a hydraulics housing (12), in which a pump ring (14), a pump ring support (16), and an eccentric (18) are accommodated, which eccentric is to be driven by a shaft (20), which defines an axial and a radial direction, wherein the pump ring (14) has a first axial side (45) and a second axial side (47), wherein the hydraulics housing (12) comprises an annular portion (22) and a first and a second lateral section (24, 26), wherein the two lateral sections (24, 26) are arranged opposite each other, wherein the pump ring (14) is arranged, at least in some portions, between the two lateral sections (24, 26) of the hydraulics housing (12), and wherein on the first axial side (45) and the second axial side (47), the profile of the pump ring (14) in each case follows a contour with an S-formed curve (32) with a convex section (34) and a concave section (36), wherein the convex section (34) lies further outwards in a radial direction of the shaft (20) in comparison with the concave section (36). |