181 |
Collar |
US1463932D |
|
US1463932A |
1923-08-07 |
|
|
182 |
Multiply interwoven fabric for collars and cuffs |
US50027721 |
1921-09-13 |
US1437067A |
1922-11-28 |
MOORE HAROLD J |
|
183 |
Collar |
US1397261D |
|
US1397261A |
1921-11-15 |
|
|
184 |
CUELLOS DE CAMISAS. |
ES200400585 |
2004-03-10 |
ES2213495B1 |
2005-06-16 |
LOPEZ FERNANDEZ JAVIER |
Cuellos de camisas. Esta invención se refiere a cuellos de camisas, del tipo que comprenden, como mínimo, un refuerzo interior del cuello fijado por cosido u otro medio satisfactorio al borde inferior de anclaje del cuello en la camisa, caracterizándose porque la costura de unión de refuerzo interno al cuello está realizada en una posición sensiblemente por debajo del borde superior de dicho refuerzo para permitir la introducción, después de su doblado hacia adentro, de la parte del cuello que sobresale y que presenta el borde averiado, disponiendo medios para la fijación firme del cuello doblado con el borde superior de refuerzo, quedando dicho borde averiado oculto detrás del refuerzo interno del cuello. |
185 |
Collar for a garment as |
DE2953408 |
1979-12-18 |
DE2953408C1 |
1993-05-06 |
BAECHTIGER URS |
|
186 |
|
AT906179 |
1979-12-18 |
AT387309B |
1989-01-10 |
|
|
187 |
|
AT906179 |
1979-12-18 |
ATA906179A |
1988-06-15 |
|
|
188 |
Welding - deposits |
DE3640374 |
1986-11-26 |
DE3640374A1 |
1988-06-01 |
TEBBE GEROLD |
An exchangeable anti-perspiration pad for underwear or articles of clothing has an absorbent layer (3) into which are incorporated micro-encapsulated odoriferous substances (10) and/or micro-encapsulated sweat-decomposing or perspiration-inhibiting or anti-inflammatory active substances (10). The absorbent layer (3) is carried by a water-impervious outer layer (2), which in turn has an adhesive layer (7) enabling its detachable application on clothes or underwear. |
189 |
"PERFECCIONAMIENTOS EN LA FABRICACION DE CUELLOS DE CAMISAS". |
ES512501 |
1982-04-30 |
ES8502322A3 |
1985-01-01 |
|
PERFECCIONAMIENTOS EN LA FABRICACION DE CUELLOS DE CAMISAS.CONSISTENTES EN UNIR POR COSIDO, LAS VARILLAS (13) CON INTERMEDIO DE EXPANSIONES LATERALES DE LAS MISMAS A LOS EXTREMOS LATERALES DEL CUELLO (14) ANTES DE LA FASE DE VOLTEADO DE PUNTAS, PARA QUE ESTAS QUEDEN DISPUESTAS EXTERIORMENTE AL CUELLO, Y PORQUE EN LA FASE DE VOLTEADO DE PUNTAS LAS VARILLAS (13) SE REBATEN SOBRE EL CUELLO ALREDEDOR DE LAS LINEAS DE COSIDO DE CADA UNA DE ELLAS, QUEDANDO DISPUESTAS DENTRO DE LA BOLSA QUE FORMAN EL CONJUNTO ENTRETELA (2)-REFUERZO (3) Y LA LAMINA DE TEJIDO (4). ASI LAS VARILLAS QUEDAN UNIDAS AL CUELLO EN UNA FASE ANTERIOR A LA REALIZACION DEL PESPUNTE DE ADORNO (11) QUE PUEDE REALIZARSE TAN CERCA DEL BORDE (16) DEL CUELLO (14) COMO SE DESEE. |
190 |
SHIRT COLLAR |
SU2977956 |
1980-08-21 |
SU1075944A3 |
1984-02-23 |
BEKHTIGER URS |
|
191 |
|
CH936879 |
1979-10-18 |
CH640709A5 |
1984-01-31 |
BAECHTIGER URS |
|
192 |
Collar protection |
DE8104703 |
1981-02-20 |
DE8104703U1 |
1981-07-23 |
|
|
193 |
COLLAR FOR GARMENT |
GB8026875 |
1979-12-18 |
GB2051558A |
1981-01-21 |
|
|
194 |
FR2354184B1 - |
FR7717240 |
1977-06-06 |
FR2354184B1 |
1980-05-09 |
|
|
195 |
Stiffening means of soft and semi-soft collar |
DE2801448 |
1978-01-13 |
DE2801448A1 |
1978-11-23 |
KAUF PETER |
|
196 |
FR2225564B1 - |
FR7413043 |
1974-04-12 |
FR2225564B1 |
1978-01-20 |
|
|
197 |
Shirt or the like. |
NL6613631 |
1966-09-27 |
NL145750B |
1975-05-15 |
|
|
198 |
Forming permanent pleat in textile article - by applying line of adhesive to article and folding and pressing article along this line |
FR7413043 |
1974-04-12 |
FR2225564A1 |
1974-11-08 |
|
A textile article (e.g. a garment of synthetic fabric) is pref. folded to produce a provisional pleat and a line of hardenable insoluble adhesive (e.g. a synthetic rubber nitrile) is applied pref. along the inside of the pleat. The article is then re-folded along the provisional pleat and pressed to produce a permanent pleat. Pref. the width of the line of adhesive is 0.254-5.08 mm; the viscosity of the adhesive is 10-100 poises; and the quantity of adhesive is 0.02-0.05 gm/m. the adhesive may be applied with a manual applicator having a chamber for receiving a tube of household glue and an elongate nozzle in which is located a freely rotatable roll. In an industrial machine the article may be fed on a conveyor through a nip of two rolls to which the adhesive is supplied. The method is simple and provides a permanent pleat which can withstand many (e.g. 20) dry cleanings. |
199 |
|
BR316572 |
1972-05-18 |
BR7203165D0 |
1973-06-07 |
MCFALLS R |
|
200 |
|
SE542767 |
1967-04-19 |
SE334336B |
1971-04-26 |
AUGUSTIN W |
|