181 |
Portable Information Device |
DE60319638 |
2003-07-09 |
DE60319638T2 |
2009-04-02 |
IINO SHOICHI; URANO NOBUTAKA |
|
182 |
Radio control clock |
GB0724496 |
2005-06-30 |
GB0724496D0 |
2008-01-30 |
|
|
183 |
Long wave signal e.g. time signal, reception possibility displaying device, has receiver antenna arranged in box in such a manner that orientation of receiver antenna runs parallel to antenna of wrist watch |
DE202006018573 |
2006-12-06 |
DE202006018573U1 |
2007-02-15 |
|
The device has receiver antenna (4) and an evaluation circuit (5) connected with the receiver antenna. The evaluation circuit compares the strength of the received signal with predetermined reference value. The receiver antenna and the evaluation circuit are mounted in an oblong box (1), which is designed for the accommodation of a radio wrist watch (7). The receiver antenna is arranged in the box in such a manner that the orientation of the receiver antenna runs parallel to an antenna (8) of the wrist watch. |
184 |
Antenna and radio clock, keyless entry system and RFID system with such an antenna |
DE102006030863 |
2006-07-04 |
DE102006030863A1 |
2007-02-15 |
ARAKI HIROKAZU; MITSUMATA CHIHARU; MITA MASAHIRO |
Die Antenne umfaßt ein magnetisches Hauptwegeelement (2) mit einer um einen magnetischen Kern (4) gewickelten Spule (5) sowie ein magnetisches Nebenwegelement (3), das magnetisch mit dem magnetischen Kern (4) verbunden ist, um mit dem magnetischen Hauptwegelement (2) einen im wesentlichen geschlossenen magnetischen Kreis auszubilden, wobei die Antenne die Beziehung (S/N)
1 > (S/N)
0 erfült, wobei (S/N)
1 das Verhältnis der Signalspannung S, die an der Spule (5) gehalten wird, zur Rauschspannung N in dieser Antenne ist und (S/N)
0 das Verhältnis der Signalspannung S zur Rauschspannung N bei einer Antenne mit dem ansonsten gleichen Aufbau, aber ohne das magnetische Nebenwegelement (3) ist.
|
185 |
Method and apparatus for time calibration |
DE102005033161 |
2005-07-13 |
DE102005033161A1 |
2006-09-07 |
AKIYAMA RYOTA; KAWASHIMA TAKEAKI |
Eine lokale Zeit wird gemäß einer Funkwellenzeit modifiziert, die von einer Zeitkalibrierungssignale übertragenden Station empfangen wird, sowie gemäß einer authentischen Zeit korrigiert, die von einem Zeit-Server empfangen wird, wenn die Differenz zwischen der lokalen Zeit und der Funkwellenzeit geringer als ein vorbestimmter Wert ist, sowie die Differenz für eine vorbestimmte Anzahl aufeinanderfolgende Male größer oder gleich dem vorbestimmten Wert ist. Die lokale Zeit wird korrigiert, während eine beim Empfangen der authentischen Zeit enthaltene Verzögerungsperiode berücksichtigt wird.
|
186 |
Radio time data reception procedure samples and stores received amplitude modulate signals for processing to reject short disturbances |
DE102004004375 |
2004-01-29 |
DE102004004375A1 |
2005-08-11 |
POLONIO ROLAND; HAEFNER HORST; SAILER HANS-JOACHIM |
A radio time data reception procedure samples and stores (XOO) a received amplitude modulated radio time signal (XO) detects transitions (X4, 5), measures their duration (T4, 5) and does not demodulate them if it is less than a preset value (Dt). Independent claims are included for a radio clock using the procedure. |
187 |
Clock system and method for controlling clock system |
HK04110006 |
2004-12-16 |
HK1067193A1 |
2005-04-01 |
KAWAGUCHI TAKASHI |
|
188 |
Electronic timepiece and electronic apparatus |
HK04107076 |
2004-09-16 |
HK1064451A1 |
2005-01-28 |
FUJIMORI SHIGEYUKI; KITAHARA JOJI |
|
189 |
Antenna device for a portable electronic |
DE69433263 |
1994-07-25 |
DE69433263T2 |
2004-08-26 |
ITOH YUKIO; YASUOKA TADASHI; AMEMIYA RYOJI |
|
190 |
Pm to Controlled by radio signals correction function |
DE69607499 |
1996-01-24 |
DE69607499T2 |
2000-10-19 |
YASUOKA TADASHI |
|
191 |
Calendar for the current date and day of week |
DE19713314 |
1997-03-29 |
DE19713314C1 |
1998-11-19 |
SCHAFFER HOLGER DIPL ING |
|
192 |
Calendar for the current date and day of week |
DE29705692 |
1997-03-29 |
DE29705692U1 |
1998-07-30 |
|
|
193 |
Wristwatch. |
ES94100551 |
1994-01-15 |
ES2110638T3 |
1998-02-16 |
GANTER WOLFGANG |
UN RELOJ (11) DE PULSERA TOTALMENTE SIN PROBLEMAS PARA EL UTILIZADOR SE CONSIGUE A TRAVES DE LA COMBINACION DE UN RADIORRELOJ (26,27) CON ANTENA (35) DE ONDA LARGA INTEGRADA POR EJEMPLO EN LA PULSERA (36) PARA LA RECEPCION DE LA INFORMACION DE TIEMPO ABSOLUTA ENVIADA CODIFICADA EN COMBINACION CON UN ACUMULADOR (16) ELECTROFISICO O ELECTROQUIMICO CARGADO POR UNA CELDA (38) SOLDAR. DE ESTA FORMA EL RELOJ (11) DE PULSERA PERPETUO SE DESARROLLA DE FORMA CICLICA Y CON RESPECTO A SU AJUSTE DE AGUJAS CON LA INFORMACION DE TIEMPO ABSOLUTA RECIBIDA A TRAVES DE LA RADIO QUE SE COMPARA PARA LA EVENTUAL CORRECCION DE INDICACION AUTOMATICA, PUDIENDO ESTAR EQUIPADO ESTE RELOJ (11) DE PULSERA CON UNA CAJA (12) COMPLETAMENTE CERRADA, ENCAPSULADA DE FORMA HERMETICA. PARA PODER PONER DEBAJO SIN EMBARGO, EL ELEMENTO LIBRE DE PERTURBACIONES FUNCIONALES, ES DECIR EL ACUMULADOR (16) PARA UNA PRUEBA DE FUNCIONAMIENTO, LA CAJA (12) ESTA EQUIPADA CON UNA ABERTURA DE PASO, APROXIMADAMENTE EN FORMA DE UN TALADRO (54)ROSCADO CERRABLE DE NUEVO DE FORMA HERMETICA, A TRAVES DEL CUAL ES ACCESIBLE AL MENOS UN PUNTO (59) DE CONTACTO EN TRACCION DE LA GUIA CONDUCTORA ELECTRICA DEL ACUMULADOR (16) PARA UNA PUNTA DE PRUEBA, A FIN DE PODER OBSERVAR, COMO SUBE LA CARGA ALMACENADA EN DEPENDENCIA DE LA RADIACION AUMENTADA FUERTEMENTE DE LA CELDA (38) SOLDAR. TAMBIEN SE PUEDE CONSEGUIR A TRAVES DE ESTE ASIMIENTO UNA CARGA RAPIDA ELECTRICA INMEDIATA DEL ACUMULADOR A PARTIR DE UN APARATO DE CARGA ADAPTADO CON RESPECTO A LAS LIMITACIONES DE TENSION. FINALMENTE PUEDE SER BOMBEADA A TRAVES DE LA SOBREPRESION DE LA ABERTURA LIBRE EN EL INTERIOR (17) DE LA CAJA, PARA PODER PRESIONAR HACIA EL EXTERIOR DE FORMA AXIAL EL CRISTAL (50) DEL RELOJ PRESIONADO DE FORMA RADIAL EN LA PARED (21) DE LA CAJA Y CON ELLO PODER DESMONTAR LA CONSTRUCCION EN FORMA DE SANDWICH EN EL INTERIOR DE LA CAJA PARA TRABAJOS DE SERVICIO. |
194 |
|
AT94100551 |
1994-01-15 |
ATE159596T1 |
1997-11-15 |
GANTER WOLFGANG |
|
195 |
|
AT94100551 |
1994-01-15 |
AT159596T |
1997-11-15 |
GANTER WOLFGANG |
|
196 |
Data transmission system e.g. for mains-fed consumer loads including dimmer switches |
DE19618223 |
1996-05-07 |
DE19618223A1 |
1997-11-13 |
SCHAEFFEL FRITZ |
The data transmission system consist of an electric transmitting arrangement (1) and an electric reception arrangement (2) for the transmission of data on an amplitude-modulated carrier frequency. The reception arrangement contains at least one narrow-band HF amplifier (10) adapted to the carrier frequency, with a circuit or signal converter (12, 13) for demodulating the entered signal. The HF amplifier and the circuit or signal converter are formed by a radio clock circuit (4) which controls a control circuit through the demodulated signal, which is formed by preferably one microprocessor (14), or containing such a microprocessor. The frequency of the carrier lies in the range between approximately 30 and 80 Khz, preferably 32768 Hz or 7750 Hz, and the carrier frequency is amplitude-modulated in the transmitter arrangement with pulses of shorter duration and pulses of longer duration, according to the data in a predetermined time period, preferably in a period of one second. |
197 |
Multiplex data packet transmission system with energy-saving timers |
DE19600922 |
1996-01-12 |
DE19600922A1 |
1997-07-24 |
AMANN MATHIAS; KAISER MANFRED |
The system comprises one or more identically constructed transmitters (201) and identical receivers (203) for packets of data transmitted over a common channel with registration bits inserted by operation of e.g. a pushbutton (202). Each receiver has an initialisation key (204) and a device (205) signalling that the initialisation code is already in use by another transmitter. Allocation of the transmitter(s) to receivers is determined by the system which also sets the characteristic time intervals of transmission. The transmitters are powered only at these times, and the receivers only at the times assigned to their allocated transmitters. |
198 |
The radio-controlled clockwork |
DE59306695 |
1993-10-27 |
DE59306695D1 |
1997-07-10 |
SCHAEFFEL FRITZ |
|
199 |
|
AT93924061 |
1993-10-27 |
AT154148T |
1997-06-15 |
SCHAEFFEL FRITZ |
|
200 |
Digital signal radio transmission method between mobile transmitter and receiver |
DE19541363 |
1995-11-07 |
DE19541363A1 |
1997-05-15 |
NAUMANN MICHAEL DIPL ING; KIEFER HORST DIPL ING |
The digital signal transmission method involves using different time slot channels allocated to an independent mobile transmitter, operating on a common frequency, whose transmission regions are identical, or intersect. The synchronisation, or formation of time slot channels per transmission is carried out by synchronising pulse, identical for all transmitters, for control of the clock generator which, on failure of the radio transmission synchronisation, operates independently with a highly constant performance. |