201 |
부루 몰딩 색동 나선형 제조 장치 |
KR2019920001078 |
1992-01-23 |
KR2019930017922U |
1993-08-20 |
박천종 |
|
202 |
피타격물의 표면 및 구조 보호용 망치 |
KR2019950001436 |
1995-01-26 |
KR2019960026834U |
1996-08-17 |
이말줄 |
본고안은표면이미려한뭄체및 외피가연약한물체의망치작업시표면을보호할수 있도록구성한망치에관한것으로서종래의고무망치, 나무망치대신에경질이면서도미세한탄성과연성이우수한성질의폴리우레탄계합성수지를망치의타격부에적용, 기존의철금속재망치를구조변경한돌출구조에탄성보호캪(CAP)으로서덮어압삽결합되는구조로하여고안완성한피타격물의표면및 구조보호용망치에관한것이다. |
203 |
멍텅구리 낚시 바늘용 부구 |
KR2019840004914 |
1984-05-28 |
KR2019850009197U |
1985-12-02 |
이정호 |
|
204 |
Bull rope release |
US318741 |
1989-03-03 |
US4909658A |
1990-03-20 |
Blue H. Townsend |
A quick safety release for bull ropes and bare back riggings. One ring on the bull rope is held to the release device by a first ring latch which is pivoted to a release frame. A pivoted spring-loaded latch arm which in its normal position is perpendicular to the ring latch holds the ring latch in position preventing it from rotating about its pivot. A release line or cord is connected to the latch arm. When the bull rider pulls the release line the latch arm is pulled away from the ring latch permitting it to come unlatched from the ring of the bull rope. |
205 |
Telescopic ram |
US634422 |
1975-11-24 |
US4041839A |
1977-08-16 |
John E. Olson |
A multistage, extensible-contractible hydraulic ram assembly for use in conjunction with a triple-lift-type mast in a lift truck. The assembly is designed for mounting in such a truck in a so-called inverted position. It is constructed with special, externally actuated, internal valving which, through controlling the action of pressure fluid within the assembly, assures positive control over the sequence of movements of the sections in a mast as such are raised and lowered, without requiring latching and interlocking of these sections. Further, the assembly features the capability of producing substantially uniform or constant lifting and lowering speeds for a load which is carried on the usual carriage mounted on a mast of the type indicated. |
206 |
Bull wheel flange |
US53464044 |
1944-05-08 |
US2359211A |
1944-09-26 |
FOX JAMES A |
|
207 |
Bull's eye target |
US12260137 |
1937-01-27 |
US2148749A |
1939-02-28 |
JAMES HAWKINS IRVING |
|
208 |
ELECTROPHYSIOLOGY CATHETER WITH A BULLSEYE ELECTRODE |
EP97920171.0 |
1997-03-31 |
EP0944353A1 |
1999-09-29 |
WITTKAMPF, Frederick, H., M., Heart Lung Inst.; WEBSTER, Wilton, W., Jr. |
An electrode catheter for cardiac electrophysiology is provided. An elongated body (11) suitable for intravascular insertion and forming an axial lumen (15) is provided. A tip electrode (31) defines an axial hole extending inward from a distal end of the tip electrode and is directly mounted to a distal end of the elongated body on a proximal end of the tip electrode. An eye electrode (30) is located within the axial hole substantially concentric to and electrically insulated from the tip electrode. Electrode lead wires (19) run through the axial lumen. One of the electrode lead wires is electrically connected to the eye electrode and another of the electrode lead wires is electrically connected to the tip electrode. |
209 |
Combination bull float |
US29438730 |
2012-12-03 |
USD716625S1 |
2014-11-04 |
Oscar Pereyra |
|
210 |
Bull dog stationery tab |
US29421631 |
2012-08-27 |
USD701910S1 |
2014-04-01 |
Steven Patrick Pascale |
|
211 |
Culinary tool ram |
US29415186 |
2012-03-08 |
USD699507S1 |
2014-02-18 |
Jonathan B. Schmidt; Dennis P. Haggerty |
|
212 |
Bull block stringup mechanism |
US43454742 |
1942-03-13 |
US2334601A |
1943-11-16 |
BRUESTLE CARL O |
|
213 |
Bull plug fitting |
US35422840 |
1940-08-26 |
US2294499A |
1942-09-01 |
HENKELL VICTOR M; HOWARD JAMES H; ZORGDRAGER MOREY M |
|
214 |
Bull board for railway stock cars |
US60828432 |
1932-04-29 |
US1923983A |
1933-08-22 |
LEWIS LARSON; BURNS TUTWILER BERNARD |
|
215 |
公牛沙滩车 |
CN201730449957.9 |
2017-09-21 |
CN304515164S |
2018-02-23 |
徐康 |
1.本外观设计产品的名称:公牛沙滩车。
2.本外观设计产品的用途:本外观设计产品用于儿童用童车。
3.本外观设计产品的设计要点:外观形状。
4.最能表明本外观设计设计要点的图片或照片:主视图最能表明本外观设计的设计要点。 |
216 |
公牛手机壳 |
CN201730037825.5 |
2017-02-13 |
CN304151349S |
2017-05-31 |
刘展腾 |
1.本外观设计产品的名称:公牛手机壳。
2.本外观设计产品的用途:本外观设计产品用于保护手机。
3.本外观设计产品的设计要点:在于产品的形状及图案的结合。
4.最能表明本外观设计设计要点的图片或照片:立体图。 |
217 |
公牛曲线锯 |
CN201530364667.5 |
2015-09-21 |
CN303570693S |
2016-01-27 |
黄炫 |
1.本外观设计产品的名称:公牛曲线锯。2.本外观设计产品的用途:本外观设计产品用于电动工具。3.本外观设计产品的设计要点:在于其形状及色彩的结合。4.最能表明本外观设计设计要点的图片或照片:立体图。5.请求保护的外观设计保护色彩。 |
218 |
Lance pump with a ram |
US13331217 |
2011-12-20 |
US09341173B2 |
2016-05-17 |
Henry Laughlin; Paul G. Conley |
An improved lance pump is disclosed for pumping a pumpable product, particularly lubricant including grease, from a lubricant supply. The pump comprises a head for placement above the supply, a tubular lance structure affixed to the head and extending down into the supply, and a pump tube inside the lance structure that is reciprocated up and down for pumping lubricant from the supply on both upstrokes and downstrokes of the tube. A ram at a lower end of the lance structure is positioned for forcing lubricant up into the tube and past an inlet check valve on a downstroke of the tube. |
219 |
Bull rope safety release |
US09146797 |
1998-09-03 |
US06168344A |
2001-01-02 |
Hector Aguirre, Jr. |
A bull rope safety release includes two shank pieces which can be joined together to keep a bull rope firmly in place over the body of a bucking bull or bronco. The safety release includes two D-rings which are connected to the bull rope and hold the safety release in place. A locking lever in one of the shank pieces has a hook which engages a brace bar in the other shank piece. The other end of the locking lever is connected to a pull cord with a wire or other means. A brace member is centrally disposed inside the body of the first shank and provides a support about which the locking lever rotates when the pull cord is yanked. A second lever is provided inside the second shank piece and can be likewise yanked to disengage the two shank pieces from one another. |
220 |
Mechanical toy bull |
US418025 |
1982-09-14 |
US4519787A |
1985-05-28 |
Lanny J. Williams |
A toy mechanical bull having rotary and reciprocal movements used in conjunction with a doll figure having releasable securing means adapted for cooperation with complementary releasable securing means on the toy mechanical bull, wherein the rotary and reciprocal movements of the toy mechanical bull will disengage the releasable securing means resulting in a simulation of a mechanical bull throwing a rider from its back. |