181 |
Method of preventing dangerous annulus pressure rise |
JP2002578039 |
2002-03-28 |
JP2005519206A |
2005-06-30 |
スタウド、ジョン・ジェイ |
モジュール式バースト・ディスク・アセンブリのための1つ若しくは複数の容器を含む修正されたケーシング結合部分。 このバースト・ディスク・アセンブリは、ねじ山若しくはスナップ・リングによって保持され、且つ保持用ねじ山若しくは一体型o−リング・シールによって密封される。 このディスクは、ユーザによって特定された圧力で、且つトラップされたアニュラス圧力によって外側ケーシングの完全性が脅かされる前に、破損する。 この設計によって、バースト・ディスク・アセンブリは、パイプの出荷前に、若しくは現場で取付けることが可能にされる。 |
182 |
Check valve and a check valve seat |
JP26007396 |
1996-08-26 |
JP2782337B2 |
1998-07-30 |
イー ウィルソン ジュニア マイケル; シー ベイテス ロイ |
|
183 |
JPH04500546A - |
JP50875289 |
1989-06-23 |
JPH04500546A |
1992-01-30 |
|
|
184 |
JPS6248009B2 - |
JP5951777 |
1977-05-23 |
JPS6248009B2 |
1987-10-12 |
TAKAHASHI JUICHIRO |
|
185 |
Actuator for underground device |
JP10120786 |
1986-05-02 |
JPS6237495A |
1987-02-18 |
RUISU EICHI ROODEN; TEII CHIYAARUSU MUUA |
|
186 |
Well drilling jet-proof device |
JP13723886 |
1986-06-11 |
JPS61294087A |
1986-12-24 |
NIEUWSTAD RONALD LEONARDUS |
|
187 |
Winze test method and its device |
JP9327983 |
1983-05-26 |
JPS58223777A |
1983-12-26 |
ANDORIYUU PATORITSUKU HOORISU |
A wireline testing tool of oil and gas wells comprises a substantially hollow body 2 to be received within the bore of a drill stem 1, containing instruments 8 for testing the well fluids. The body 2 is provided with upper outlet ports 4 and lower inlet ports 13 to allow passage of well fluids into the body 2 and into direct communication with the instruments 8. The upper ports 4 may be closed to provide shut-in of the well by sliding an outer member 3 over the outlet ports 4. |
188 |
Method and device for testing well |
JP4613180 |
1980-04-08 |
JPS55152292A |
1980-11-27 |
TOMASU AARU MATSUKUGURAU SHIIN; JIYON KURISU JIMUMAAMAN |
|
189 |
Method and device for improving weak viscous ground |
JP5951777 |
1977-05-23 |
JPS53145314A |
1978-12-18 |
TAKAHASHI YUUICHIROU |
|
190 |
하향 천공식 해머 드릴 비트 조립체 |
KR1020167014922 |
2014-11-10 |
KR1020160086355A |
2016-07-19 |
세펠레코니; 칼손안나 |
하향천공식해머드릴비트조립체는드릴비트구성요소에대한풋 밸브의회전에의해서맞물려러그들및 숄더들이풋 밸브를드릴구성요소에서잠금하도록반경방향으로겹쳐지게할 수있는협력하는러그들및 숄더들의형태로각각의인접영역들을갖는풋 밸브및 드릴구성요소를포함한다. 이조립체는특정스웨깅또는유압식/공압식조립체공구들에대한필요성없이현장에서커플링및 디커플링을허용하는이점이있다. |
191 |
이중 구배 드릴링 시스템 |
KR1020140064485 |
2014-05-28 |
KR1020150136863A |
2015-12-08 |
전동수; 성상경 |
이중구배드릴링시스템이개시된다. 본발명의이중구배드릴링시스템은, 이중구배압력을이용한이중구배드릴링시스템에있어서, 시추구조물에상측부가결합되고하측부는 BOP(Blow Out Preventer)에결합되며, 내부에드릴파이프가배치되고머드의리턴경로가되는내부관 부재; 시추구조물에상측부가결합되고하측부는 BOP에결합되며, 내부관 부재의외부에배치되는외부관 부재; 및내부관 부재와외부관 부재의하측영역에마련되어내부관 부재로이동되는머드(mud)를차단하는머드이동차단부를포함한다. |
192 |
공동수로가 구비된 연결배관 일체형 지하수 상부 밀폐 장치 |
KR1020120105409 |
2012-09-21 |
KR101254083B1 |
2013-04-23 |
변권식 |
PURPOSE: A connecting tube integrated type closing device is provided to facilitate to perform maintenance internal attachments, to facilitate to install underground, and to smoothly pump underwater. CONSTITUTION: A connecting tube integrated type closing device comprises a main body casing(10), a cavity waterway(100), an external discharge tube(13), and a connection tube(20). The main body casing is internally equipped with a water meter and an emergency water supply tube and seals the top of underwater tube well. The cavity waterway forms an internal space for filling in underwater into the main body casing. The outside discharge tube is connected to the outside drain tube from the collaboration waterway through the sidewall of the main body casing. The external discharge tube is connected to an external water supply tube by penetrating the side wall of the main body casing through the cavity waterway. The connection tube is detachably connected to the cavity waterway and interconnects a water pumping tube, the cavity waterway, and the external discharge tube. |
193 |
다운홀 도구 |
KR1020167034677 |
2015-05-12 |
KR1020170013900A |
2017-02-07 |
파커,데일 |
시추공내에측량도구를삽입하도록시추스트링에부착하기위한측량도구로서, 측량도구는시추스트링에부착하도록적응된근위단부및 시추스트링으로부터유체를수용하도록적응된하우징을순회하는보어를갖는하우징, 및보어내에수용되도록적응된피스톤을포함하고, 피스톤은적어도제1 상태와제2 상태간 선택적으로변위되도록적응되되, 제1 상태에서는유체가제1 위치에서하우징을퇴장하고그리고제2 상태에서는유체가제2 위치에서하우징을퇴장한다. |
194 |
이중 구배 드릴링 시스템 |
KR1020140075643 |
2014-06-20 |
KR1020150145554A |
2015-12-30 |
전동수; 성상경; 김필근; 김건호; 류민철 |
이중구배드릴링시스템이개시된다. 본발명의이중구배드릴링시스템은, 이중구배압력을이용한이중구배드릴링시스템에있어서, 시추구조물에상측부가결합되고하측부는 BOP(Blow Out Preventer)에결합되며, 내부에드릴파이프가배치되고머드의리턴경로가되는내부관 부재; 시추구조물에상측부가결합되고하측부는 BOP에결합되며, 내부관 부재의외부에배치되는외부관 부재; 및내부관 부재와외부관 부재의하측영역에마련되어내부관 부재로이동되는머드(mud)를흐름을차단하며, 단절된내부관 부재의하부영역을실링하는실링부를포함한다. |
195 |
타격식 해머드릴 |
KR1020097010235 |
2007-10-17 |
KR101412907B1 |
2014-06-26 |
로저토니; 로저다니엘폴 |
짧은 드라이브 핀(4)들과 긴 드라이브 핀(5)들에 의해 유지되는 드라이버 척(1)의 보어 내에 유지되는 드라이브 비트(2)를 포함하는 타격식 해머드릴이 제공되어 있다. 상기 척(1)과 비트(2)는 기계가공된 길이방향 홈(3)들을 가지고, 비트 생크 매 두번째 홈은 끝이 막혀 있고, 짧은 핀 - 길이 릴리프(a short-pin-length-relief)에 의해 인접한 개방 홈에 연결된다. 상기 짧은 핀(4)들은 상기 드릴비트 개방 홈들과 드라이버 척 홈(3)들의 정렬에 의해 형성되는 보이는 구멍 안에 삽입된다. 다음으로, 상기 긴 핀(5)들이 삽입가능할 때까지 상기 짧은 핀(4)들을 옆으로 비켜 놓도록 상기 척을 인덱스(index)한다. 상기 드라이버 척(1)과 드릴비트(2)는 회전식으로 결합된다. 상기 비트(2)는 상기 끝이 막힌 홈 내에 걸리게 되는 짧은 핀(4)에 의해 소망의 거리까지 슬라이딩된다. 이러한 구조는 통상의 비트 리테이너 링을 수용하기 위해 비트 생크 확장을 필요로 하지 않는다.
타격식, 다운 홀, 해머 드릴, 포팅, 드라이버 척, 비트, 생크 |
196 |
타격식 해머드릴 |
KR1020097010235 |
2007-10-17 |
KR1020090091715A |
2009-08-28 |
로저토니; 로저다니엘폴 |
There is provided a downhole hammer including a drill bit (2) retained by short (4) and long (5) drive pins in the bore of a driver chuck (1). The chuck (1) and bit (2) shank have machined longitudinal grooves (3), every second bit shank groove being blind and connected to the adjacent open groove by a short-pin-length relief. The shorter pins (4) are inserted into the visible holes formed by the alignment of the open drill bit grooves and driver chuck grooves (3). The chuck (1) is then indexed which shunts the short pins (4) sideways until the longer pins (5) are insertable. The driver chuck (1) and drill bit (2) are engaged rotationally. The bit (2) slides by the desired distance due to the shorter pins (4) being entrapped in the blind grooves. The arrangement does not require a bit shank extension to accommodate a conventions bit retainer ring. ® KIPO & WIPO 2009 |
197 |
임계적인 환형 압력 상승을 방지하기 위한 방법 |
KR1020037012787 |
2002-03-28 |
KR100742578B1 |
2007-08-02 |
슈타우트존제이 |
본 발명은 모듈형의 안전 파열판 조립체를 위한 리셉터클(들)을 포함하는 변형 케이싱 커플링에 관한 것이다. 안전 파열판 조립체는 나사 또는 스냅 링에 의하여 유지되며, 나사를 적소에 유지함으로써 또는 일체의 0링 시일에 의해 밀봉된다. 안전판은, 트랩된 환형 압력이 외부 케이싱의 완전성을 위협하기 전에 사용자가 정한 압력에서 파열된다. 이러한 구조로 인하여, 안전 파열판 조립체는 현장에 또는 파이프 선적 전에 설치될 수 있다. |
198 |
EXPANDABLE TUBING RUN THROUGH PRODUCTION TUBING AND INTO OPEN HOLE |
EP17171162.5 |
2013-01-30 |
EP3244003B1 |
2018-12-26 |
FRIPP, Michael; GANO, John; BESSELINK, Peter; VAN MOORLEGHEM, Wilfried |
Downhole completion assembly for sealing and supporting an open hole section of a wellbore including a sealing structure (112) movable between contracted and expanded configurations, a truss structure (114) also movable between contracted and expanded configurations, wherein, when in their respective contracted configurations, the sealing and truss structures (112, 114) are each able to axially traverse a production tubing (108) extended within a wellbore (104), a conveyance device (402) operably coupled to the sealing and truss structures (112, 114) and configured to transport the sealing and truss structures in their respective contracted configurations through the production tubing (108) and to an open hole section (102) of the wellbore (104), and a deployment device (404) operably connected to the sealing and truss structures (112, 114) and configured to radically expand the sealing and truss structures from their respective contracted configurations to their respective expanded configurations. |
199 |
DISTRIBUTED INFLOW CONTROL DEVICE |
EP12890766.4 |
2012-12-31 |
EP2938813B1 |
2018-11-14 |
LOPEZ, Jean-Marc; HOLDERMAN, Luke William; FRIPP, Michael Linley; ZHAO, Liang |
Certain aspects of the present invention are directed to a distributed inflow control device that can be disposed in a wellbore through a fluid-producing formation. The distributed inflow control includes a shroud that can be disposed in the fluid-producing formation. The shroud circumferentially covers a section of a tubing string. The shroud includes a profile having multiple flow paths between the fluid-producing formation and an inner volume of the section of the tubing string. Each flow path restricts a fluid flow through the flow path and is independent of each other flow path. The distributed inflow control device also includes a seal over the profile including the flow paths. The seal causes fluid to flow from an inlet to an outlet of each flow path and prevents fluid from entering or exiting each flow path at a point other than the respective inlet or the respective outlet. |
200 |
DOWNHOLE CONTINGENCY APPARATUS |
EP14195113.7 |
2012-09-19 |
EP2860342B1 |
2018-11-14 |
Reid, Mike Adam; Smith, Gary Henry |
A tubing mounted completion assembly (100) includes at least one downhole valve assembly (10) and at least one contingency device (12, 14, 16, 18). The contingency device or devices (12, 14, 16, 18) is/are associated with and separate from the downhole valve assembly (10). The contingency device or devices (12, 14, 16, 18) is/are adapted to operate upon failure of operation of the downhole valve assembly (10). |